Region: AU  CN Asia

Webforge Product Manufacturing Tolerances

Manufacturing Tolerances of Webforge Products

Webforge's global manufacturing sites work to exacting quality standards. The following information provides guidance on the acceptable manufacturing tolerances for grating.

tolerances

Mild / Stainless Steel

tolerance_table_steel








Aluminium

tolerance_table_aluminium

Tolerances FRP

FRP


tolerance_table_frp
tolerances_Expanded

Expanded



tolerance_table_expanded

Transverse Bow

Mild/Stainless Steel

transverse_bow_steel











Aluminium

transverse_bow_aluminium

Longitudinal Bow

Mild /Stainless Steel

longitudinal_bow_steel









Aluminium

longitudinal_bow_aluminium



Fabrication Welding

Banding bars and attachments are welded with minimum 3mm fillet welds to one side of:

  • every 5th load bar on A & B Pattern grating
  • every 4th load bar on C & D Pattern grating
  • every 3rd load bar on F Pattern grating

Other welding is applied to cut-outs, splays or circles as appropriate or as requested.

Cross Rod Location Load Bar Lean

Cross Rod Alignment and Spacing

Stair Tread Tolerance

cross_rod_location_and_load_bar_lean
cross_rod_alignment_and_spacing
stair_tread_tolerance

MonowillsTM Stanchion Tolerance

Pipe Sizes

The tolerances for pipes will depend on the pipe specification that is used.
  1. Variations in cross section
    Specified OD up to 50mm +/- 0.2mm
    Over 50mm OD to 75mm +/- 0.25mm
  2. Variations in thickness +/- 10%

Base Plates

All dimensions +/- 1mm
Thickness +/- 0.2mm

Sphere Drilling

Drilled diameters 2 to 4mm oversize
Hole Angle +/- 1º in any direction (any 2 axis)
All stanchiones (except AM) +/- 0.5º in the slope direction only



Webforge_Monowills tolerance

Webforge Asia Contact Us
Webforge Asia Load Tables
Webforge Asia Request A Quote


Webforge operates throughout the Asia Pacific region in locations such as  India, New ZealandSingapore, Philippines, Indonesia, Thailand, Vietnam, Malaysia, China, and Australia.